ClearOne comm 600/900 To select a frequency, To perform RF radio test, To enter flash duration

58

Using the RAV — Programming Phone Preferences

Using the RAV— Programming Phone Preferences 59

To select a frequency

1.Press to access the menu options.

2.Scroll to Configuration and press .

3.Scroll to Frequency and press .

4.Choose a frequency from 1–8.

5.Press to save the frequency and return to the Configuration menu.

Note: The channel frequency allows the mixer to communicate with the controller. The frequency in RAV-Ware must match the RAV controller frequency. See page 32.

Frequency 1	*
Frequency 2
Frequency 3

Figure 4.16. Select a frequency

Note: If you are using the European or South African version of RAV frequency 1 and frequency 8 are the same frequency.

To perform RF radio test

1.Press to access the menu options.

2.Scroll to Configuration and press .

3.Scroll to RF Radio Test and press .

4.Press to exit and return to the Configuration menu.

Note: The RF Controller will send out a radio signal and display the signal strength between the Controller and the mixer. Use this feature to ensure the mixer and Controller are set to the same frequency and to verify of the signal strength. Use

RF Radio Test

-------

Exit

	Figure 4.18. RF Radio test
Signal Level	Reliability
0–4 bars	Fair
4–8 bars	Good

To enter flash duration

1.	Press	to access the menu options.
2.	Scroll to Configuration and press		.
3.	Scroll to Flash Duration and press		.

1000 Save

the chart to determine the reliability of the signal.

!Attention: If you are having trouble with the communication between the Controller and the mixer, refer to the Troubleshooting guide for tips on improving signal strength.

9–12 bars	Better
13–16 bars	Best

Figure 4.19. Signal strength reliability

4.	Type the duration number from
	50–1000 ms.
5.	Press	to save the duration and return
	to the Configuration menu.

Figure 4.17. Enter flash settings

To change LCD contrast

1.Press to access the menu options.

2.Scroll to Configuration and press .

3.Scroll to Contract and press .

4.Choose a contrast setting (0–3).

5.Press to select the contrast and return to the Configuration menu.

Contrast 0	*
Contrast 1
Contrast 2
	Figure 4.20. Contrast

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760