DEVICE SETUP
Device Setup enables you to select the device you have connected to your Chat 150, and then apply the pre- set audio settings so that it operates at optimal efficiency (Figure 3.11). If the device you are using is not list- ed, you can create a custom device by using Advanced: Database. (see Advanced: Database later in this chapter for more information).
FIGURE 3.11 Device Setup Screen
The Chat 150 software includes a database of
To set up the Chat 150 for your device(s), perform the following steps:
1.Ensure that the Chat 150 is connected via USB to your PC. Launch the Chat 150 software.
2.Click on the Device Setup button.
3.Select the type of device connected to your Chat 150.
>Note: If you have a Phone or VC Breakout Box connected to your Chat 150, select the part number in the device type list that matches the part number on the bottom of your Phone or VC Breakout Box.
4.Select the manufacturer of the device connected to your Chat 150. If the manufacturer of your device is not listed, select Generic. (Note that Generic is not an available manufacturer under Phone Breakout Box).
5.Select the model of the device connected to your Chat 150. If the model of your device is not listed, select Generic).
6.Click the Add to My Devices button to add this device to your My Devices list.
7.A message appears indicating that the device was successfully added.
8.If you would like to apply these settings to your Chat 150 now, click the Apply to Chat button to apply the settings.
9.A message appears indicating that the settings have been applied to your Chat 150.
