Auto Amplify OFF
To set your handset in the standard mode so that it will reset to normal sound levels when you hang up. This allows people who do not require the level of amplification offered on the phone to use it.
Turn the “AUTO AMPLIFY” switch in the battery compartment to the OFF (down) position. The amplify feature is automatically deactivated each time you use the phone. You will manually need to activate the function temporarily by pressing the “AMPLIFY” button.
Caution: When the “AUTO AMPLIFY” switch is set to ON, the handset volume will be set to loud. To protect people who do not experience a hearing loss, we suggest setting the switch to OFF. You may turn the extra amplification feature back ON by pressing the “AMPLIFY” button.
Handset Vibration Setting
The vibration call alert feature notifies you of incoming calls by making the handset vibrate. When an incoming call is received, you can turn the vibrate/shake mode to ON (up) position, and the handset will vibrate/shake. To turn OFF this function, just turn the switch to OFF (down) position.
FLASH (F) Function
Press to answer an incoming call if you have Call Waiting (if you subscribe to the service from your local phone company).
BASIC FUNCTION
To Make A Call
Press the TALK button and wait for a dial tone.
Dial the telephone number
Note: During the call you can press the F button to switch over to another call while using call waiting.
To Receive a Call
To receive a call simply pick up the handset and press the TALK button.
To End a Call
Simply press the TALK button.
Using the Pre-Dialing Function
In standby mode, dial your desired number, You can press F to delete any numbers entered in error.
If the phone number is correct, press TALK button to dial the number.
9 – ENGLISH
