Cleveland Range KCL-25-T, KGT-25-T manual Operating Instructions, Item #, Description, Function

OPERATING INSTRUCTIONS

2

3

1

7

4

5

6

8

General Parts Drawing

ITEM #	DESCRIPTION	FUNCTION
1.	Tilt Wheel (tilting models only)	Used for tilting the kettle.
2.	Vacuum/Pressure Gauge	Indicate steam pressure in PSI inside steam jacket as well as
		vacuum in inches of mercury.
3.	Pressure Relief Valve	This valve is used to vent the kettle and in the unlikely event there is
		an excess steam build-up in the jacket, this valve opens
		automatically to relieve this pressure.
4.	Low Water Indicator Light (Red)	When lit, indicates that the kettle is low on water and will not operate
		in this condition (see RESERVOIR FILL PROCEDURES on page #24).
5.	On-Off Switch/	Turns kettle ON/OFF and allows the operator to adjust the kettle
	Solid State Temperature	temperature in increments from 1 (Min.) to 10 (Max.).
	Control	(see TEMPERATURE RANGE CHART on page #6).
6.	Heat Indicator Light (Green)	When lit, indicates that the kettle's burner is on.
		Cycles ON-OFF with burner.
7.	Water Level Sight Glass	Displays water level in steam jacket.
8.	Ignition Failure Indicator Light	Indicates failure of heating system to ignite.
	(Amber)
9.	Tangent Draw-Off Valve	Used for draining product or wash water from kettle. It is supplied as
		standard equipment on stationary kettles and is optional on tilting kettles.

5