INSTALLATION INSTRUCTIONS
A. GENERAL
This equipment should be installed only by qualified, professional plumbers, pipe fitters, and electricians.
1.The installation of this Combi must conform with:
a.The National Fuel Gas Code, ANSI Z223.1 / NFPA 54 (latest edition), or the Natural Gas and Propane Installation Code CSA B1 49.1 as applicable.
b.The National Electrical Code, ANSI/NFPA 70 (latest edition), or the Canadian Electrical Code, CSA C22.2 as applicable.
c.The Food Service Sanitation Manual of the Food and Drug Administration (FDA).
d.All applicable national, state, and local laws, codes, and regulations.
2.This equipment is to be installed to comply with the applicable federal, state, or local plumbing codes.
3.Installation instructions must be read in their entirety before starting installation of a Combi.
4.Install the Combi according to the policies and procedures outlined in this manual.
DANGER
Improper installation, adjustment, alteration, service, or maintenance of a Combi, or installation of a damaged Combi can result in DEATH, INJURY, EQUIPMENT DAMAGE, and void the warranty.
NEVER install damaged Combis.
ALWAYS have qualified Cleveland Range authorized personnel install and service Combis.
5.Inspect the Combi for shipping damage.
a.Check carton and packing for shipping damage.
b.Note any damage on the shipping paperwork as soon as the carton arrives.
c.Unpack the Combi and check for shipping damage.
d.If the Combi is damaged or damage is suspected:
1)Inform your dealer at once.
2)Inform Cleveland Range in writing within 3 days.
3)Submit a Damage Claim to the Shipper.
4
