B. INSTALLATION OF THE COMBI – General Instructions

General Instructions:

1.Select the Combi’s operating location.

2.Complete the water, drain, and electric lines before positioning and leveling the Combi.

3.Position and level the Combi.

4.Connect the utility lines after positioning and leveling the Combi.

5.Call Cleveland Range at 216-481-4900 for the Free Start-Up Program’s Performance Checkout.

6.After Setup and Performance Checkout, the Combi should provide years of reliable operation.

DANGER

Improper lifting can result in DEATH, INJURY, AND EQUIPMENT DAMAGE.

Use enough workers with training and experience lifting heavy equipment to place

Combis on supporting surfaces, and lift and handle Combis and acessories.

DANGER

Operating an out of level Combi can cause DEATH, INJURY, and EQUIPMENT DAMAGE.

Combis must be level both front-to-back and side-to-side in all installations.

NEVER operate an out of level Combi.

If a Combi is suspected to be out of level, shut it down at once and call you qualified

Cleveland Range authorized service agency at once.

WARNING

All clearance requirements above, below, and around the Combi are the same for non- combustible locations as for combustible locations.

Failure to maintain required clearances and additional distances as needed can result INJURY and EQUIPMENT DAMAGE.

Consult manufacturers’ literature, and sales and service agencies as needed.

5

Page 8
Image 8
Cleveland Range OGB-6.20, OGS-6.20, OGS-10.10, OGB-10.10 manual Installation of the Combi General Instructions