2.Disassembly

Disassembly

Figure 12

Processor

Installation

a. Insert the CPU.

b.Turn the release latch to- wards the lock symbol.

c.Remove the sticker from the heat sink and insert the heat sink.

d.Tighten the screws.

Processor Installation Procedure

1.Insert the CPU 1 , pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE IT!), and turn the release latch 2 towards the lock symbol (Figure 12b).

2.Remove the sticker 3 (Figure 12c) from the heat sink.

3.Insert the heat sink 4 as indicated in Figure 12c.

4.Tighten screws 5 - 7 in the order indicated on the label.

5.Replace the component bay cover and tighten the screws (page 2 - 14).

a.c.

1

3

4

 

b.

d.

6

 

 

 

4

 



5

7

 

 

 

1.

CPU

2

 

4.

Heat Sink

 

• 3 Screws

2 - 16 Removing and Installing the Processor

Page 42
Image 42
Clevo M760TU, M740TU manual Processor Installation Procedure