Clevo M740TU, M760TU manual Removing the System Memory RAM, RAM Module Removal

Removing the System Memory (RAM)

The computer has two memory sockets for 200 pin Small Outline Dual In-line Memory Modules (SO-DIMM) supporting DDR2 667/800MHz. The main memory can be expanded up to 4GB. The SO-DIMM modules supported are 1024MB, and 2048MB and DDRII Modules. The total memory size is automatically detected by the POST routine once you turn on your computer.

Memory Upgrade Process

1.Turn off the computer, remove the battery (page 2 - 5).

2.Locate the component bay cover 1 , and remove screws 2 - 4 .

3.Carefully (a fan and cable are attached to the under side of the cover) lift up the bay cover.

4.Carefully disconnect the fan cable 5 , and remove the cover 1 .

a.

2	3	4		2
		1	3	1
				4
M740T/M740TU			M760T/M760TU

b.

11

5 5

Disassembly

Figure 7

RAM Module

Removal

a. Remove the screws. b. Remove the cover.



Contact Warning

Be careful not to touch the metal pins on the module’s connecting edge. Even the clean- est hands have oils which can attract parti- cles, and degrade the

module’s perfor- mance.



1.Component Bay Cover

• 3 Screws

2.Disassembly

Removing the System Memory (RAM) 2 - 11