2-25

Compaq ProLiant 1850R Servers Maintenance and Service Guide
24X Max Low-Profile CD-ROM Adapter Board
To remove the 24X Max low-profile CD-ROM adapter board:
1. Perform the preparation procedures. See page 2-4.
2. Remove the server cover. See page 2-7.
3. Remove the diskette drive. See page 2-27.
4. Disconnect the IDE cable and power cable from the adapter board 1.
5. Remove the two T-15 screws 2 attaching the adapter board to the chassis.
6. Pull the adapter board straight out the back of the 24X Max low-profile CD-ROM and
lift it from the server 3.
1
23
Figure 2-19. Removing the 24X Max low-profile CD-ROM adapter board
Reverse steps 1 through 6 to replace the 24X Max low-profile CD-ROM adapter board.