2-35
Compaq ProLiant 1850R Servers Maintenance and Service Guide
To remove either of the processors:
1. Perform the preparation procedures. See page 2-4.
2. Remove the server cover. See page 2-7.
3. Push in the retaining clips on each side of the processor 1.
4. Pull out the processor 2.
1
2
Figure 2-30. Removing the processor
Reverse steps 1 through 4 to replace the processor. Use the System Configuration Utility to
reconfigure your system if you are replacing a faulty processor. See Chapter 3 for more
information.
CAUTION: Processors on the same processor board MUST be
installed in matched frequency.
IMPORTANT: The processor is keyed to be sure correct alignm ent . Align
the pattern of pins in the processor with the pattern of holes in the s oc k et .
The pins and holes will not line up if the processor is turned the wrong way.