
Ejecting a Diskette
Because the SuperDisk drive has a motorized Diskette Eject button, your computer must be turned on in order to eject a diskette. Do not turn off your computer until the diskette has been ejected.
The diskette will not eject if the computer is still writing to the diskette.
To eject a diskette, complete the following steps:
1.Push the Diskette Eject button. The diskette will eject from the drive.
2.Remove the diskette from the drive.
OR
From the Windows desktop,
3.
Manually Ejecting a Diskette
If you need to manually eject a diskette when the power is off, complete the following steps:
1.Make sure the power is off and any external power sources are disconnected.
2.Insert a metal rod, such as a paper clip (approximately 1/16 inch in diameter and at least 3/8 inch in length) into the Manual Eject hole and push firmly as shown in the figure. The diskette should pop out of the SuperDisk drive.
Manually Ejecting a Diskette
3. Remove the diskette from the drive.
If the diskette does not eject, contact your local