Compaq 407511-002 manual Removal and Replacement Procedures

Removal and Replacement Procedures

2.Release the ZIF connector to which the TouchPad cable 1 is connected and disconnect the TouchPad cable 2 from the system board.

✎The TouchPad cable is included in the Cable Kit, spare part number 407775-001.

3.Remove the two Phillips PM2.5×13.0 screws 3 that secure the base enclosure to the computer.

Disconnecting the TouchPad Cable and Removing the Base Enclosure Screws, Part 1

5–42 Maintenance and Service Guide