Removal and Replacement Procedures
2.Remove the two Phillips PM1.5×3.0 screws 1 that secure the Bluetooth module to the top cover.
3.Slide the Bluetooth module 2 out of the clip in the top cover.
4.Disconnect the Bluetooth module cable 3 from the Bluetooth module.
5.Disconnect the Bluetooth module cable 4 from the system board.
✎The Bluetooth module cable is included with the Bluetooth module and is also available in the Cable Kit, spare part number
Removing the Bluetooth Module
Reverse the above procedure to install the Bluetooth module.
Maintenance and Service Guide |