Compaq 407511-002 manual Removing the Wireless Antenna Transceivers and Cables

Removal and Replacement Procedures

✎The wireless antenna transceivers and cables are available in the Wireless Antenna Kit, spare part number 410118-001.

26.If it is necessary to replace the wireless antenna transceivers and cables, remove the Phillips PM2.5×5.0 screws 1 that secure the wireless antenna transceivers to the display enclosure.

27.Release the retention tabs 2 built in to the display enclosure lining that secure the wireless antenna cables to the display enclosure.

28.Detach the wireless antenna transceivers 3 from the display enclosure.

29.Remove the wireless antenna transceivers and cables 4.

Removing the Wireless Antenna Transceivers and Cables

Reverse the above procedure to reassemble and install the display assembly.

5–40 Maintenance and Service Guide