Removal and Replacement Procedures

2.Loosen the two Phillips PM2.5×5.0 captive screws 1 that secure the hard drive cover to the computer.

3.Lift the rear edge of the hard drive cover 2, and then swing it up and forward and remove it.

The hard drive cover is included in the Plastics Kit, spare part number 407779-001. The hard drive cover is also available using spare part number 419328-001.

Removing the Hard Drive Cover

5–8

Maintenance and Service Guide

Page 92
Image 92
Compaq 407511-002 manual Removing the Hard Drive Cover