Compaq 407511-002 manual Removing the Fan Assembly Screws, Part

Removal and Replacement Procedures

4.Turn the system board right-side up with the expansion port 2 docking connector toward you.

5.Disconnect the fan cable 1 from the system board.

6.Remove the following screws:

2 One silver Phillips PM2.5×4.0 screw that secures the expansion port 2 bracket and fan assembly to the system board

3 Two slotted M1.5×9.0 screws on each side of the expansion port 2 connector that secure the expansion port bracket and fan assembly to the system board

4 Two Phillips PM3.0×6.0 screws on each side of the external monitor connector that secure the fan assembly to the system board

Removing the Fan Assembly Screws, Part 2

Maintenance and Service Guide 5–71