A Check of the Supplied Items and the Names of the Parts

Names and Functions of the Parts (Projector)

Focus adjustment ring

Turn this to adjust the focus.

See Page E-22.

Document cover

The document or printed material to be read is placed under this cover.

See Page E-34.

Operation panel

The buttons used for regular operation are located here. See Page E-11.

Air intake vent (Air filter)

Air is drawn into the projector from here. There is an air filter to prevent dust from entering the inside of the projector. See Page E-50.

RE

UTPAC/

EZEERF

Remote control

IR sensor

Lamp unit cover (Underneath projector)

The projection lamp unit is located inside. See Page E-47.

FFO EZEERF

 

REFSN

NOIT

ART

 

TAOR

 

TUPIN

P

 

ER MET

OV/CP

AML

YBDNATS

N/O

Tilt adjustment lever

Press here to adjust the tilt foot. See Page E-22.

Exhaust vents

Air is discharged from here.

Projection lens

The image is projected from here. * Be sure to remove the lens cap

before projecting.

Lens cap

Zoom lever

Tilt foot

This foot is used to adjust the vertical angle of the projection as well as the left- right balance. Turning it to the left extends it and turning it to the right shortens it. See Page E-22.

Turn this to adjust the screen size. See Page E-22.

• During unit operation, do not obstruct the front of the lens. During operation, strong light through the

CAUTION lens is projected. Obstruct the front of the lens causes fire or burn.

• During projection, be sure to remove the lens cap. Negligence to observe it may deform the lens

E-