Maintenance

When the power has failed (When all the LED go off with the power ON)

Measures to be taken

1.Disconnect the power plug from the outlet.

2.Check the following matters and perform the countermeasure properly.

Is the ambient temperature in excess of 35°C (95°F)?

Are the ventilation vents blocked?

Is the air filter blocked?

Breakdown of an internal circuit could be the problem.

Please use the projector in an operation ambient temperature of 0°C (32°F) to 35°C (95°F).

Rearrange the setup location of the projector and separate the projector from surrounding objects. See "Do Not Block the air vents" on Page E-4.

Clean the air filter.

See "Cleaning the Air Filter" on Page E-50.

Please request repair at your store of purchase.

E-46