Regular Operation

To view the portion that has been cut off

A B C

Operation with the Projector

Scrolling is not possible from the main unit’s control panel.

Operation with the Remote Control

Press the SCROLL (▲▼) buttons and scroll the projection image up or down.

•Pressing the ZOOM (–) button permits display of a large portion within the reading range of the vertical display. The undisplayed portion can be displayed with the SCROLL (▲▼) buttons.

NOTE: When the orientation of the projection image is changed, even if the zoom function is in use, the display of the switched screen will be adjusted to match the width, the same as with regular changes of orientation.

Enlarging and Reducing the Projection Image

This operation enlarges or reduces the size of projected image.

The magnification can be adjusted from none to approximately 25x (length ratio approx. 5x) when the input is set to OHP, 16x (length ratio approx. 4x) when the input is set to PC, or 6.25x (length ratio approx. 2.5x) when the input is set to VIDEO.

At SXGA input, the enlarged display is not available.

Operation with the Projector

Enlarging/reducing is not possible from the main unit’s control panel.

Operation with the Remote Control

Press one of the zoom buttons.

(+): Enlarge the size of the projected image （(–): Reduce the size of the projected image

E-24