Maintenance
Lamp Unit Replacement Procedure
To prevent burns, wait one hour or longer after the lamp has been switched off before performing the following pro- cedure.
1Remove the lamp unit cover
Using a minus screwdriver, loosen the screws of the lamp unit cover, pull in the direction of the arrow, and remove the cover.
2Loosen the mounting screws of the lamp unit
Using a minus screwdriver, loosen the 2 screws of the lamp unit.
3Pull out the lamp unit
Hold the handle of the lamp unit and pull it up and out.
4Install a new lamp unit
❶Take the lamp unit and press it into the projector.
❷Check that the two positioning prongs on the bottom of the lamp unit are securely fit into the two holes.
❸Tighten the 2 mounting screws of the lamp unit.
❹Align the 2 tabs located on the lamp unit cover with the projector and attach from the side of the tabs. Tighten the mounting screws of the lamp unit cover.
|
| 4 |
3 | 1 | 4 |
|
| Positioning protrusions |
|
| 3 |
| 2 |
|