Regular Operation

This section describes the use of direct operation using the projector and remote control buttons.

Please see the items on Page E-32 "Menu Operation Method" and Page E-39 "Menu Description" for information about operation using the menu.

Select the Input

When the projector’s power is turned on, one of the input selection icons ([OHP, PC or VIDEO] or [OHP, VIDEO (Component) or VIDEO]) is displayed.

(When the PC input is set to RGB)

OHP PC VIDEO

(When the PC input is set to component)

INPUT ROTATION FREEZ

TRANSFER

Operation with the Projector

Select the input using the INPUT buttons.

The input switches in the order OHP → PC → VIDEO or OHP → VIDEO (Component) → VIDEO each time the button is pressed.

Operation with the Remote Control

Select the input using the INPUT buttons.

OHP VIDEO

VIDEO (D4)

* For instructions on selecting the PC input, see page E-39.

NOTE:

•The input mode at starting time will be the same as it was the last time the projector was switched off.

•When the icon is displayed, either the left or right key permits input switch- ing.

•The color mode icon is displayed at the leftmost end.

•For the color mode, see page E-41, “Image Adjustment.”

Color mode icon table

Standard Presentation Natural Blackboard

Changing the Orientation of the Projection Image Effective Only with OHP Input

The direction of the video currently projected is changed over every 90 degrees (clockwise). The changed video is displayed according to the lateral axis of the screen.

When 90-deg rotation is chosen

Light blue (currently displayed location)

Green frame (chosen location)

INPUT

ROTATION FREEZE OF

 

TRANSFER

Operation with the Projector

Press the ROTATION button.

Operation with the Remote Control

Press the ROTATION button.

•Pressing the rotation button displays the rotation selection icon. Choose the intended direction. With changeover of the video, the display disappears.

E-23