Connection of the Power Cable and On/Off Switching
Switch On the Power
1Connect the power cable
The projector will enter the standby mode and the ON/STANDBY LED will light in red.
INPUT
ON/STANDBY 
LAMP/COVER
TE
P
INPUT |
| |
ROT | ATION | |
TRAN | ||
| ||
SFER |
|
FREEZEO FF
TEMP
TESTTEST
RGBRGB
V S |
|
| L |
| V |
| R |
| L |
| AUDI |
| OR |
| ME |
電源 | AUDMORYIO |
接続コー | USB |
をしドは必は必 | |
てくださだずさずいアいア。ース。ース | USB |
| AC |
| IN |
To wall outlet.
F REEZE
2Press the ON/STADNBY button (
)
Operation with the | Operation with the |
Projector | Remote Control |
ON/STANDBY
LAMP/COVER
TEMP
The fan will turn, the lamp will light, and the ON/STANDBY LED will light in green. The LAMP/COVER LED will light in green.
•If the LED lights in red after the ON/STADNBY button is pressed, projec- tor trouble is indicated.
→ See Page
•Check that the lens cap has been removed before pressing the ON/ STADNBY button.
The projector is now able to make a projection.
Switch Off the Power
1 | Press and hold the ON/STANDBY button ( ) for 1 second or longer Operation with the | Operation with the |
| Projector | Remote Control |
| "Press ON/STADNBY button again to turn off" will appear on the projection screen. |
|
2Press the ON/STANDBY button (
) one more time.
The lamp will go off.
• The lamp/cover LED flashes green, then turns off once cooling is completed.
ON/STANDBY
LAMP/COVER
TEMP
The ON/STANDBY LED lights in resistance.
•When the lamp is off, pressing the ON/STANDBY button while the LAMP/COVER LED is flashing green will not switch the lamp on again.
To switch the lamp on again, please press the ON/STANDBY button again after the ON/STANDBY LED lights in red.
3Disconnecting the Power Cable
The ON/STANDBY LED on the operation panel will go off.
The power cable can be disconnected even while the lamp/cover LED is flashing green (direct power off function). The fan continues to run for a while to cool the machine.
•With the lamp on and/or with the SD memory card access LED of the SD memory card ON, do not pull out the power cable.
•After using the SD memory card, do not leave the SD memory card inserted and be sure to remove
and store it.
CAUTION • Unplug the power plug of the projector from the wall outlet when the projector will not be used for an extended period.
•When the reinserting the power plug into the outlet soon after having unplugged it, please allow a fixed time (of about 10 seconds) before doing so.
•Wait for the cooling fan to stop turning before stowing away.