NOTE: Do not turn off your iPAQ as it must remain on in order to reset.

Clearing memory

If you want to clear all data from your iPAQ H3000 and return it to the factory settings, you should clear the memory.

Clearing memory deletes all data and restores the iPAQ H3000 to its default set- tings. Programs installed at the factory remain, while data you have created and programs you have installed are erased.

1. Using the stylus, slide open the On/Off door on the base of the iPAQ H3000.

2.Slide the On /Off switch to the Off position using the stylus. Wait about one minute, then slide the switch to the On position.

a-2Tips and Troubleshooting

Page 98
Image 98
Compaq iPAQ H3000 manual Clearing memory