Compaq N150 Series manual 10-4

Computer Utilities

The power-on password is now set. Every time you turn on the computer, resume working from Hibernation mode, or access PSU, you must enter this password.

To remove a password:

1.Access PSU by turning on the computer and pressing F10 when the Compaq logo displays on the screen.

2.Enter your current password and press enter.

3.Move to Password On Boot. Use the + or - key to select disable and press enter.

4.Move to Set Supervisor Password. In the upper space, enter your current password and press enter. In the spaces to enter your new password and confirm new password, press enter. Press enter again to Exit the screen.

5.Use the arrow keys to select Exit from the menu bar.

6.Make sure Exit Saving Changes is selected. Press enter, then select Yes to save your changes and exit.

10–4 Hardware Guide