Compaq N150 Series manual Installing the battery pack

Hardware and Software Setup

2.Locate the battery pack in the shipping box. If tape is covering the battery contacts, remove it before installing the battery pack.

3.Install the battery pack into the battery compartment.

a.Turn the computer bottom side up.

b.Insert the battery at a 45-degree angle into the compartment 1, ensuring that the battery tabs are flush with the front edge of the compartment.

c.Press down the battery pack until the release latch 2 clicks.

Installing the battery pack

4.Turn the computer top side up and place it on a flat surface near an electrical outlet.

1–2 Hardware Guide