S p e c i f i c a t i o n s : E a r t h S m a r t T M E C M S e r i e s C h i l l e r s
B
A
MODEL | ||
Performance characteristics |
|
|
Capacity* tons | 0.41 | 0.70 |
Compressor Hp {kW}✝ | 0.5 {0.37} | 0.75 {0.56} |
Pump Hp {kW} | 0.25 {0.19} | 0.5 {0.37} |
Chilled water flow‡ gpm {lpm} | 0.9 {3.4} | 1.7 {6.4} |
Chilled water pressure‡ psi {bar} | 60 {4.1} | 60 {4.1} |
Reservoir capacity gal {liters} | 10 {37.8} | 10 {37.8} |
Dimensions inches {mm} |
|
|
A - Height | 39.7 {1008} | 39.7 {1008} |
B - Width | 18.7 {475} | 18.7 {475} |
C - Depth | 24.2 {615} | 24.2 {615} |
Process connections inches {mm} |
|
|
Process (to and from) | 0.5 | 0.5 |
Weight lb {kg}§ |
|
|
Installed | 223 {101} | 233 {106} |
Shipping | 170 {77} | 180 {82} |
Voltages full load amps** |
|
|
115V/1 phase/60Hz | 14 | NA |
220V/1 phase/60Hz | NA | 11 |
Refrigerant |
|
|
| ||
Refrigerant charge lb {kg} |
|
|
| 1.3 {0.6} | 1.3 {0.6} |
|
|
|
SPECIFICATION NOTES:
C
*Ton capacity at 12,000 BTU/ton @ 50°F {10°C} leaving water temperature @ 115°F {46°C} condensing tempera- ture. Capacities may be ± 5% as reserved by the compressor manufacturer. Capacity multipliers are: 50°F {10°C} - 1.00; 40°F {4.4°C} - 0.80.
✝The ECM Series Chiller uses a hermetic reciprocating compressor.
‡Consult pump curve for exact characteristics relating to pump performances.
§Chiller installed weight includes a completely filled reservoir.
** No allowance for inrush current. Ground fault interruption to be supplied by the customer. Full load amps must be used to size supply conductors. Consult a Conair representative for 50 Hz operation.
Specifications can change at any time. Contact your Conair representative for the most current information.
2 - 8 l D e s c r i p t i o n