I n f i n i t y B u t t o n
Pressing the “Infinity” button will acknowledge alarms and return the user to the Main screen.
Star tin g t h e C hille r
To start the chiller:
1Toggle the power switch to the On or “I” position. The control display will illuminate. Facing the chiller’s control, the “To Process” actual temperature will be on the left, the setpoint temperature is on the right. See Operation section entitled, Chiller Sequence of Operation.
2Set the cooling temperature setpoint. Use the up arrow button ▲ on the control, to raise the setpoint. Use the down arrow button ▼ to lower the set- point. The temperature will ramp up at approximately 1 (one) degree per second. After 2 (two) seconds of inactivity the setpoint entered will become the targeted setpoint temperature.
On Position
✐NOTE: If the setpoint displays “OFF” in the display, raise the setpoint with the up arrow button ▲ to see
the actual setpoint.
SD
1 2 | % |
4 n o i t a r e p O
O p e r a t i o n l 4 - 3