✐NOTE: Always refer to the wiring dia-
grams you received with your chiller to locate specific elec- trical components.
✐NOTE: Also inspect the chiller’s plug
wiring terminations.
5 - 4 l M a i n t e n a n c e
C h e c k i n g E l e c t r i c a l C o n n e c t i o n s
WARNING: Electrical Hazard
Before performing any work on this item, disconnect and lock out electrical power sources to prevent injury from unexpected energization or startup. Be sure that power to the chiller is OFF when doing any maintenance on the chiller. Follow all safety rules when performing any maintenance on this equipment.
WA R N I N G : I m p r o p e r i n s t a l l a t i o n , o p e r a t i o n o r s e r v i c i n g m a y r e s u l t i n e q u i p m e n t d a m a g e o r p e r s o n a l i n j u r y.
This equipment should only be installed, adjusted and serviced by a qualified technician who is familiar with the construction, operation and potential hazards of this type of machine.
All wiring, disconnects and fuses should be installed by a qualified electrical technician in accordance with electrical codes in your region.
To check electrical connections:
1Be sure the main power is disconnected and/or the chiller is locked out. Always disconnect/unplug and lockout the main power source before opening the unit for servicing.
2Remove the chiller’s top lid, by first removing both side panels and then the four
(4) retaining bolts that secure the chiller’s top lid.
3Inspect all wires and connections.
Look for loose wires, burned contacts and signs of
4Replace the chiller’s side panels and then the top lid by replacing the four (4) retaining bolts.
5Inspect the exterior power cords.
Cords should not be crimped, exposed or rubbing against the frame. If the main power cord runs along the floor, make sure it is positioned where it could not rest in pooling water or could not be ran over and cut by wheels or casters.