5. Transferring Files to the Computer
You can view and store the files you have captured with the camera using your PC. To download the files for viewing, you must first install the software that comes with your camera.
Connecting the Camera to the Computer:
MAIN MENU |
Setup |
Exit |
SETUP |
|
60S | |
Driver | PC |
TV | PAL |
PlayLogo | O f f |
SETUP |
|
60S | |
Driver | DSC |
TV | PAL |
PlayLogo | O f f |
1.Select either PC (Windows Only) or DSC in the Setup Menu.
•Set the Mode switch to 
.
•Press the MENU button. Use the 
button until Setup is highlighted.
•Press 
to enter the Setup menu.
•In the Setup menu, press 
until Driver is highlighted.
•Press 
to select DSC or PC.
2.Connect your camera to the computer using the USB cable provided.
3.Plug the rectangular end of the USB cable that is included with the Concord
documentation for more information on the location of the USB port. (fig.5.1)
4. Open the Cable Connection panel on the camera, by sliding the door in the downward direction, then lift
the door.
5. Plug the square end of the USB cable into the USB fig.5.1 connector located inside the Cable Connection panel.
6.When the camera is connected to the computer for the first time, the camera’s driver installation will begin. Please follow the
39
