Concord Camera Eye-Q 2133z manual Windows ME When removing Procedure USB devices, it is

Eye-Q 2133z User’s Manual

Windows ME	When removing	Procedure:
and Windows	USB devices, it is	A.	Right-click the Unplug or Eject hardware icon at
2000: when	recommended that		the bottom-right of your computer screen.
the USB cable	users follow the	B.	Left-click the Unplug or Eject hardware text box
is unplugged	"Safe Removal of
			to open the 'Unplug or Eject Hardware' screen.
from the PC,	USB Device"
		C.	From the 'Unplug or Eject Hardware' screen,
an "Unsafe	procedure.
			select the device to be disconnected and then
Removal
			click the Stop button to bring up the 'Stop a
Device
			Hardware device' confirmation screen.
Detected" error
		D.	From the 'Stop a Hardware device' confirmation
message
			screen select the device to be stopped and click
appears.
			OK to bring up the 'Safe To Remove Hardware'
			confirmation.
		E.	Disconnect the Eye-Q 2133z from your PC.
Images lose	If your hard disk's	Please check to make sure your hard drive's DMA
formatting data	DMA setting is	setting is enabled, as follows:
during image	turned off images
capture in "PC	may lose formatting	1.	From the Windows Start menu, select Settings,
Camera"	data during image		then Control Panel.
mode.	capture. (Windows
		2.	In the Control Panel double-click System, then
	98 and Windows		click the Device Manager tab.
	ME only.)
		3.	Select your hard drive from the list, then click
			Properties.
		4.	Click the Settings tab.
		5.	Make sure the box marked DMA is checked. If
			not, check the box to ensure that your hard drive
			will protect image attributes during capture.

54