4.Make sure the installation CD is in the CD drive and turn the camera ON. The Windows Add Hardware Wizard will automatically detect the camera and lead you through the installation procedures for the corresponding mode.
You will need to do this once for each mode (PC Camera and MSD.)
To ensure that the camera works in the correct mode, unplug the USB cable from the camera and use the Mode Dial to select either "PC Camera mode" for PC Camera or any other mode for MSD. Then reconnect the USB cable and follow the installation procedure
You should reboot your computer before using camera and software for the first time. Remember to connect your camera to the PC with the USB cable before transferring pictures.
Making the Connection
The camera can be used in two different modes when connected to your computer:
•Mass Storage Device (MSD)
•PC Camera
31
