Cooper Bussmann 9752 manual Contents

Contents

1. Introduction	3
The Alarm System	3
The Keypads	3
The 725r Telecommand (Remote Setting
Device)	5
About This Guide	5
2. Everyday Operation	6
How Do I Know if the System is Work-
ing?	6
Setting the System	6
Timed Set	6
Exceeding the Exit Time	7
Final Door Set	7
Using an Exit Terminate Button to
Set the System	8
Part Setting	8
Instant Set	9
Keyswitch Setting	9
Setting From a 725r	10
If the System Will Not Set	10
Detector Active	10
Other Faults	10
What To Do When ￿and ￿Glow ....	11
Unsetting the System	11
Unsetting From a Keyswitch	11
Unsetting From the Keypad	11
Unsetting From a 725r (Full or Part
Set)	12
If You Exceed the Entry Time	12
Starting Alarms Yourself	12
Duress Code	13
3. After an Alarm	14
Fire Alarm	14

Disarming the System	14
Resetting the System	14
Customer Reset	15
Remote Reset	15
4. Special Functions	16
Introduction	16
Omitting Zones	16
Omitting 24 Hour Detector Zones 17
Access Codes	17
Duress Code	18
Changing Access Codes	18
Changing User Names	18
Using the Log	19
Table 1. Log Event Codes	20
Setting the Time and Date	21
Turning the Chime On/Off	22
Testing the System	22
Bell Test	22
Walk Test	22
Starting a Call Out to <Downloader> . 23

9752 Hardwired Control Panel User Guide.

© Cooper Security Ltd. 2002

Every effort has been made to ensure that the contents of this book are correct. However, neither the authors nor Cooper Security Limited accept any liability for loss or damage caused or alleged to be caused directly or indirectly by this book. The contents of this book are subject to change without notice.

Printed and published in the U.K.

2 496679