|
|
|
| 2. Everyday Operation |
To part set: |
|
| ||
1. | Close doors and windows in the protected area. | |||
2. | Key in your access code at the keypad. |
|
| |
3. | Press B (or C or D). |
|
| |
| The keypad starts the quiet |
|
| |
|
|
|
| |
| Part Set exit tone (see |
|
|
|
| "Instant Set"). | Part Set |
| |
|
| |||
|
|
| ||
|
| Exit Tone | ||
Note: Some Levels on your system may be programmed for Silent Set. When setting these Levels the system does not give any tones from the keypads or internal sounder.
4. Leave via the designated exit route and if necessary close the final door.
The exit tone stops and the |
|
system sets. The system |
|
gives a double "beep" and |
|
the keypad display shows |
|
which Level is set. | "beep beep" |
Instant Set
The area protected by a part set system may not need an exit route or final exit door. For these areas the Installer may program the B, C or D keys as Instant Set. With Instant Set the system sets as soon as you press B or C. The system gives a double "beep" to show that it is set.
Note: Instant set is not available for key A (Full Set).
Keyswitch Setting
1.Close all doors and windows.
The Ready lamp on the keyswitch should be glowing to indicate that all the detec- tors are closed. (Some types of keyswitch do not have lamps.)
2.Either turn the keyswitch to "Full" to set Level A Or turn the keyswitch to "Part" to set Level B.
3.Leave the premises and close the final door.
The system gives a double "beep" and sets. The Armed lamp glows.
Armed
Ready
Off
Full Part
| Armed |
| Armed |
| Ready |
| Ready |
Off | OR | Full | Off |
Full | Part | Part |
496679 | 9 |
