2. Everyday Operation
get to the keypad and unset the system.
The entry time starts when you open the designated entry door. During the entry time the keypads give a "galloping" entry tone to warn you that the timer is running.
1. Enter through the designated entry door and go to the keypad.
As you enter the premises the system starts the entry timer and the keypads give the entry tone.
2. Key in your access code. | Entry tone |
The entry tone stops and the system gives a double "beep".
The system is now unset.
Unsetting From a 725r (Full or Part Set)
1.Press on the telecommand.
The entry tone stops and the system gives a double "beep".
The system is now unset.
"beep beep"
"beep beep"
Note: Your system may be programmed so that you must open the entry door and start the entry timer before you can unset the system with a telecommand. Check with your Installer.
If You Exceed the Entry Time
If you regularly have problems exceeding the entry time, ask your Installer about "Dual Ply Entry" and "Alarm Abort".
If your system is programmed for Dual Ply Entry, then the control unit adds a 30 second grace period to the end of the entry time. During that grace period the keypads give a high pitched continuous tone to warn you that the entry time has run out.
If your system is connected to an ARC and you accidentally create an in- truder alarm yourself then you normally have at least 90 seconds to cancel the alarm before the Centre calls the police. This feature is called Alarm Abort, ask your Installer for more details.
Starting Alarms Yourself
There are three types of alarm that you can start yourself: PA (Panic), Medi- cal Assistance, and Fire. Your Installer must program your system to enable these functions. You can start these alarms from the keypads by pressing two keys at the same time. Remember:
12 | 496679 |
