6.0 Mains Connection
"Normal supply for the system should be derived from the public supply system.
"When no public supply is available, privately generated power may be used.
"The standby battery provides 3.2Ah which will maintain the system in operation for at
least 6 hours upon a Mains failure.
The EASICHECK™ draws a maximum of 1 Amp from the 230V mains supply, wiring used
should be adequate for this load, and should be marked
‘EMERGENCY LIGHT SYSTEM, DO NOT SWITCH OFF’.
Aplug and socket is not satisfactory. The mains supply should be connected only to the
terminal block marked ‘230V’, this can be found on the top left hand side of the power supply
board.
14
EASICHECK™
LNE
230-240 VAC
Mains
Note: Using a switched DPST spur provides a method of isolating the Mains supply for
maintenance purposes.