Cooper Lighting 1001 6.1 Battery Connection

6.1 Battery Connection

The two 12V Batteries are connected together in series. The Red wire from the EasiCheck is

connected to the Red terminal of one of the Batteries, the link wire is then fitted to the Black

terminal of that Battery, the other end of the link wire is fitted to the Red terminal of the other

Battery, then finally the Black wire from the EasiCheck is connected to the unconnected Black

Battery terminal.

EASICHECK™

Black(-VE)

(-VE)

(+VE)

(+VE) BlackRed

Red

Contents

Main Lighting and Security 1234 5 INSTALLATION INSTRUCTIONS AND OPERATING MANUAL EASICHECK 1001 Self Contained Page INDEX 1.0 Introduction 1.1 Specification 1.2 Features 2.0 Programming the EASICHECK SCAEL Interface. 2.1 Installation of the SCAEL Interface. 3.0 Installation 3.1 Installation Guide 4.0 Loop Circuits 4.1 Isolators ISOLATOR PART No: 7466-0005 4.2 Loop connection diagrams 5.0 Cable Requirement 5.1 Cable Length - Voltage drop 5.1.2 Loop Circuit; 5.1.3 Loop with spurs; Page Page 6.1 Battery Connection +- 7.0 System Wiring 8.0 Networking NETWORK CARD 8.1 Printer Connections. 9.0 Main Panel Operation 9.1 Initial Power Up (Autolearn Mode) 9.2 Commissioning 9.3 Setting the Time & Date 9.4 Test Schedule 9.4.1 Weekly Test; 9.4.2 Network Address; 9.4.3 View Group Test; 9.5 User Menu Options 9.5.1 Enable / Disable All; 9.5.2 Reset the Panel; 9.5.3 Print Options; 9.5.4 Discharge Test; 9.5.5 LED Test (on the fitting) 9.5.6 V(Voltage) / I(Current) Display; 9.6 User menu flowchart EASICHECK Control Panel User Menu Structure Self-Contained 26 10.0 Up/Downloading using PC Software 10.1 Connection Information # Site Configuration. Page Page Page Page Page 12.0 Group Testing 13.0 Weekly Test 4.0 EasiCheck Commissioning Request Form