8.3.2.2 LAN Config
Field Name | Explanation |
|
|
IP Address | LAN static IP. |
|
|
Subnet Mask | LAN Subnet Mask. |
|
|
DHCP Service | Activate DHCP server for LAN port. The phone must be rebooted |
| for the DHCP server setting to take effect. |
|
|
NAT | Enable NAT operation |
|
|
Port Mirror | Port Mirror can only be activated in bridge mode. If activated, the |
| data stream from the WAN port is copied to the LAN port of the |
| phone. |
|
|
Enable Bridge Mode | If Bridge Mode is activated, the phone will not provide an IP address |
| for the LAN port. Instead, the LAN and WAN will be part of the |
| same network. If this is activated, clicking Apply, will cause the |
| phone will reboot. |
|
|
Note: When LAN IP or bridge mode status is changed, the system will reboot! If bridge mode is chosen, static LAN configuration will be disabled automatically.
8.3.2.3 Qos & VLAN Config
The phone supports 802.1Q/P protocol and DiffServ configuration. Use of a Virtual LAN (VLAN) allows voice and data traffic to be separated.
35
