![](/images/new-backgrounds/1140443/14044399x1.webp)
Field Name |
| Explanation |
|
Phone number | There are two types of matching: Full Matching or Prefix Matching. | ||
| In Full matching, the entire phone number is entered and then | ||
| mapped per the Dial Peer rules. |
| |
| In prefix matching, only part of the number is entered followed by | ||
| T. The mapping with then take place whenever these digits are | ||
| dialed. Prefix mode supports a maximum of 30 digits. | ||
|
| ||
Destination | Set Destination address. This is optional. For a peer to peer call, | ||
| enter the destination IP address or domain name. To use a dial rule | ||
| on the SIP2 line, enter 0.0.0.2. For SIP3 enter 0.0.0.3 | ||
|
|
| |
Port | Set the Signaling port, the default is 5060. |
| |
|
| ||
Alias | Set the Alias. This is the text to be added, replaced, or deleted. It is | ||
| optional. |
| |
|
|
| |
Note: There are four types of aliases. |
| ||
1) Add: xxx – xxx will be dialed before any phone number. |
| ||
2) All: xxx – xxx will replace the phone number. |
| ||
3) Del: The characters will be deleted from the phone number. |
| ||
4) Rep: xxx – xxx will be substituted for the specified characters. |
| ||
|
|
| |
Call Mode | Select either SIP or IAX2 protocol. |
| |
|
| ||
Suffix | Characters to be added at the end of the phone number. This is | ||
| optional. |
| |
|
| ||
Delete Length | Sets the number of characters to be deleted. For example, if this is | ||
| set to 3, the phone will delete the first 3 digits of the phone number. | ||
| This is optional. |
| |
|
|
|
|
| Dial Peer Examples |
| |
Web Interface |
| Explanation | Example |
|
|
|
|
|
| Set phone number, | Dial “93333” |
|
| Destination, Alias and Delete | The SIP2 server will |
|
| Length. | receive “3333” |
|
| Phone number is XXXT; |
|
|
| Destination is 255.255.255.255 |
|
|
| (0.0.0.2) and Alias is del. |
|
|
| Any phone number that begins |
|
|
| with XXX will be sent via |
|
|
| SIP2 after the first several |
|
|
| digits are deleted depending on |
|
|
| the delete length. |
|
|
|
|
|
|
| This creates a speed dial | Dial “2” |
|
| function. Dialing “2”, will | The SIP1 server will |
|
| cause the entire alias number | receive 33334444 |
|
| to be sent out. |
|
|
|
|
|
50