Country Flame HR-01 Fuel Type:, Hopper Size:, Flue Size:, Flue Type:, Air Inlet:, Auger Type:, Controls:, Electrical:, Measurements:, Weight :, Clearances:, Shroud Measurements:

APPENDIX C: TECHNICAL SPECIFICATIONS

Fuel Type:	#2 Yellow Shelled Corn Fuel		Wood Pellet Fuel
	Moisture Content: 14% or less (12% preferred)		A.P.F.I. residential fuel
	Heat Content: 10,000 Btu/lb*		Heat Content: 8200 BTU/lb
	Ash Content: 3% maximum		Ash Content: 1% max
			Bulk Density: 40 lb./cubic ft. min
			Moisture Content: 8% max
			Size:	1/4” to 3/8” diameter
				1.5” long max
			Fines: 1% max through 1/8th screen
Hopper Size:		75 pounds corn or 55 pounds wood pellets
Flue Size:		3” or 4” – dependent on the chimney height
Flue Type:		Type L or PL (double wall vent)
		Type L or PL (single wall stainless steel liner)
Air Inlet:		1 1/2” Sch 40 Black Iron pipe
Auger Type:		1 1/8” cup Auger Feed System
Controls:		Electronic Integrated Feed Rate/Blower Speed Controls
Electrical:		120 Volts, 3 Amperes, and 60 Hz
Measurements:		UNIT BODY HEIGHT		22.75”
		HEIGHT ON PEDESTAL		33.75”
		HEIGHT ON LEGS		31.25”
		UNIT WIDTH (REAR)		25.5”
		WIDTH AT WIDEST POINT		30.75”
		UNIT DEPTH		24.5”
Weight :		STOVE WEIGHT		400
Clearances:		UNIT TO SIDEWALL		2”
		UNIT TO BACKWALL		1”
		UNIT CORNER TO DIAGONAL WALL		1”
		TOP TO COMBUSTIBLE		8”
		TOP TO CEILING (Alcove)		8”

Shroud Measurements:

*BTU/lb can vary depending on the moisture content of the corn.

Version 2.0b 46