5.Attach the front enclosure panel on the protruding support pins and fasten the sides, top and bottom using the six (6) flexible latches (Figure 12). The mounting holes are located on top of the panels.
Tip: For ease of attaching the front box cover, pull the Dump Lever and tilt the body back. Set the front box cover over the protruding pins, one side at a time, making certain that the six (6) flexible latches are on the outside of the panels (Figure 12).
6.Lower the bed until it is locked in place with the Dump Lever (Figure 8 on page 14). Attach the rear panel on the protruding pins and secure in place with the six (6) flexible latches (Figure 13).
Tip: Set the rear panel over the protruding pins, one side at a time, making sure to keep the flexible latches on the outside of the box.
| Attach over |
Attach over Pins | Pins |
| |
Flexible |
|
Latches |
|
6 places |
|
| Flexible |
| Latches |
| 6 places |
Tilt Bed
Back
Figure 12 | Figure 13 |
DR COMMERICAL LEAF and LAWN VACUUM Safety & Operating Instructions | 15 |
