Installing and Operating BayStack ARN Routers
ISDN BRI Adapter Module Requirements
The ISDN BRI Adapter module (Order No. CV0004002) is approved only for installation in a host, and with host attachments, which are either type approved for such apparatus or, if supplied after 1st March 1989, are marked with or supplied with a statement that the host is supplied under the terms of General Approval Number NS/G/1234/J/100003.
Installation of the ISDN BRI module in any BayStack ARN chassis (Order Nos. CV1001001, CV1001002, CV1001003, CV1001004, CV1001005, CV1101001, CV1101002, CV1101003, CV1101004, CV1101005) complies with all requirements listed in this section. Installation of the ISDN BRI upgrade module in any ARN complies with all requirements listed in this section.
Table
Table | ISDN BRI Safety Status (Order No. CV0004002) | ||
|
|
|
|
Port Location |
| Port Description | Type of Circuit |
|
|
|
|
ISDN |
| BRI ISDN | TNV at SELV levels |
|
|
|
|
P6 |
| Host Port | SELV |
|
|
|
|
Table D-9 lists the ISDN connector pinouts.
Table | ISDN Connector Pinouts | |
|
|
|
Pin | Signal |
|
|
|
|
1 | No connection |
|
|
|
|
2 | No connection |
|
|
|
|
3 | Tx+ |
|
|
|
|
4 | Rx+ |
|
|
|
|
5 | Tx- |
|
|
|
|
6 | Rx- |
|
|
|
|
7 | No connection |
|
|
|
|
8 | No connection |
|
|
|
|
114200 Rev. A |
