Bay Technical Associates none Connecting a PC Console, Connecting a Terminal Console to an ARN

Installing and Operating BayStack ARN Routers

5.Attach the 25-pin receptacle connector on the combined cable and adapter to the console host connector (Figure 1-15).

COMM

	UL
	Redundant Power
1.2A	UL
100-240~
50-60Hz
	Modem

20 mA PR KB

Console cable plus null modem adapter

ARN0058A

Figure 1-15. Connecting a Terminal Console to an ARN

6.Insert the 9-pin receptacle end of the console cable into the ARN console port connector.

The console is now connected to the ARN.

Connecting a PC Console

You need both pieces in the ARN console/modem cable kit to connect a PC:

•Order No. 110307 serial console/modem cable (with 9-pin receptacle to 25-pin plug connectors)

•Order No. 110308 null modem crossover adapter (with two 25-pin receptacle connectors)

You also need another standard AT serial cable with a 25-pin plug connector.

Once you have the correct equipment, complete the following steps:

1.Power on and configure the PC console, using the parameters in Table 1-3 and instructions in the console user manual.

1-22 114200 Rev. A