Bay Technical Associates none Connecting a Terminal Console, Console Parameters, Parameter Value

Installing the BayStack Advanced Remote Node

Connecting a Terminal Console

You need both pieces in the ARN console/modem cable kit (Order No. 110310) to connect a terminal console:

•Order No. 110307 serial console/modem cable (with 9-pin receptacle to 25-pin plug connectors)

•Order No. 110308 null modem crossover adapter (with two 25-pin receptacle connectors)

Once you have the appropriate equipment, complete the following steps:

1.Power on and configure the console, using the parameters in Table 1-3. Refer to the console user manual for instructions.

Table 1-3.	Console Parameters
Parameter		Value
Baud Rate		9600
Data Bits		8
Stop Bits		1
Parity		None

2.Power off the console.

3.Attach the null modem crossover adapter to the 25-pin cable connector.

4.Insert the screw on the cable connector into the receptacle on the adapter connector and tighten the screw (Figure 1-14).

Console cable Null modem adapter

Rotate to tighten screw		Screw receptacle
		AN0010A
Figure 1-14.	Attaching the Null Modem Adapter
114200 Rev. A		1-21