Bay Technical Associates none manual Frame Relay Worksheet, Addr Q.922 November

Installing and Operating BayStack ARN Routers

Bay Networks Proprietary PPP Worksheet (continued)

Requested Information	Options		Your Response
Enter Remote Address	1.	DCE
selection [3]:	2.	DTE
	3.	EXPLICIT
	Note: Reverse local and remote
	address values when
	configuring the device at the
	other end of the circuit.
	(Exception: When connecting to
	a Series 5 router that uses
	DCE/DTE addressing, use the
	SAME local address value.)

Frame Relay Worksheet

Requested Information	Options		Your Response
Enter Management type [3]:	1.	DLCMI None
	2.	Rev 1 LMI
	3.	ANSI T1 617D
	4.	CCITT Annex A
	5.	LMI Switch
	6.	Annex D Switch
	7.	Annex A Switch
Enter addressing type [4]:	1.	ADDR Q.921
	2.	ADDR Q.922 (MARCH ’90)
	3.	ADDR Q.922 (NOVEMBER
		’90)
	4.	ADDR Q.922
Enter address field length [2]:	2.	Two Bytes
	3.	Three Bytes
	4.	Four Bytes
Enter DLCI number [30]:	Enter the permanent virtual
	channel (PVC) number.
(For DLCMI None, LMI Switch, Annex
D Switch, and Annex A Switch only)	Note: The valid range for the DLCI
	number is between 16 and 1007.

B-12 114200 Rev. A