GLOSSARY OF TERMS
AMPERAGE (AMPS) – A measure of the flow of electric current. Higher ratings generally means the tool is suited for heavier use.
ARBOR LOCK – Allows the user to keep the blade from rotating while tightening or loosening the arbor bolt during blade replacement or removal.
BASE – Supports the table, holds accessories and allows for workbench or leg set mounting.
BEVEL LOCKING HANDLE – Locks the miter saw at a desired bevel angle.
BEVEL SCALE – To measure the bevel angle of the saw blade 0° to 45° left.
CARBIDE TIPPED – Extremely hard steel pieces with sharp cutting edges fastened to cutting tools such as saw blades.
COVER PLATE SCREW – Loosen this screw and rotate the plate for access to the blade arbor bolt.
EXTENSION CORD – An electric cord used between power tools and outlets to extend the range of the tools. The more amerage your tool uses, the longer the distance, the larger the size of the wire needed in your extension cord.
EYE PROTECTION – Goggles or spectacles intended to protect your
eyes. Eye protection should meet the requirements of ANSI Z.87.1 (USA) or CSA
FACE SHIELD – An impact resistant shield that helps to protect your face from chips, sparks, small debris.
Should only be used in conjunction with additional eye protection.
FENCE – Helps to keep the workpiece from moving when sawing. Scaled to assist with accurate cutting.
GUARD – Protective devise that forms a barrier between a hazardous object such as a blade, wheel or cutter and the operator.
HOLD DOWN LATCH – Locks the miter saw in the lowered position for compact storage and transportation.
INSTRUCTION OR OPERATOR’S MANUAL – Booklet accompanying your power tool that describes the hazards and safe operation procedures, outlines basic tool operation, care and maintenance.
MITER HANDLE – Used to rotate the table, and to rotate the saw to a right or left cutting position.
MITER SCALE – Measures the miter angle 0° to 45° left and right.
MOUNTING HOLES – To mount the miter saw to a stable surface.
ON/OFF TRIGGER SWITCH – To start the tool, squeeze the trigger. Release the trigger to turn off the miter saw.
15 
