NOTE: Glasses or goggles not in compliance with ANSI Z87.1 could seriously injure you when they break.

13.WEAR A FACE MASK OR DUST MASK. Sawing operation produces dust.

14.SECURE WORK. Use clamps or a vise to hold work

when practical. It is safer than using your hand and it frees both hands to operate the tool.

15.DISCONNECT TOOLS FROM POWER SOURCE before servicing, and when changing accessories such as blades, bits and cutters.

16.REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in the OFF position before plugging the tool in.

17.USE RECOMMENDED ACCESSORIES. Consult this Operator’s Manual for recommended accessories. The use of improper accessories may cause risk of injury to yourself or others.

18.NEVER STAND ON THE TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is unintentionally contacted.

19.CHECK FOR DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function – check for alignment of moving parts, binding of moving parts, breakage of parts, mounting

and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

20.NEVER LEAVE THE TOOL RUNNING UNATTENDED. TURN THE POWER “OFF”. Do not walk away from a running tool until the blade comes to a complete stop and the tool is unplugged from the power source.

21.DO NOT OVERREACH. Keep proper footing and balance at all times.

22.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories.

23.WARNING: Dust generated from certain materials can be hazardous to your health. Always operate saw in well-ventilated area and provide for proper dust removal.

24.

 

DANGER

People with

 

 

!

 

 

electronic devices, such as

 

pacemakers, should consult their

 

physician(s) before using this

 

product. Operation of electrical

 

equipment in close proximity to

 

a heart pacemaker could cause

 

interference or failure of the

 

pacemaker.

 

6

Page 6
Image 6
Craftsman 137.21194 operating instructions Danger