ACCESSORIES AND ATTACHMENTS
RECOMMENDED ACCESSORIES
!WARNING
●Use only accessories recommended for this miter saw. Follow instructions that accompany accessories. Use of improper accessories may cause hazards.
●The use of any cutting tool except 10 in. saw blades which meet the requirements under recommended accessories is prohibited. Do not use accessories such as shaper cutters or dado sets. Ferrous metal cutting and the use of abrasive wheels is prohibited.
●Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious injury.
ACCESSORIES
Visit your Sears Hardware Department or see the Sears Power and Hand Tool Catalog to purchase recommended accessories for this power tool.
!WARNING
●To avoid the risk of personal injury, do not modify this power tool or use accessories not recommended by Sears.
●Read warnings and conditions on your CARBIDE TIPPED SAW BLADE. Do not operate the saw without the proper saw blade guard in place. Carbide is a very hard but brittle material. Care should be taken while mounting, using, and storing carbide tipped blades to prevent accidental damage. Slight shocks, such as striking the tip while handling, can seriously damage the blade. Foreign objects in the workpiece, such as wire or nails, can also cause tips to crack or break off. Before using, always visually examine the blade and tips for bent blade, cracks, breakage, missing or loose tips, or other damage. Do not use if damage is suspected. Failure to heed safety instructions and warnings can result in serious bodily injury.
TOOLS NEEDED FOR ASSEMBLY
SUPPLIED | NOT SUPPLIED |
Blade Wrench | Adjustable Wrench |
Hex Key | Combination Square |
| |
| Philips Screwdriver |
| Slotted Screwdriver |
COMBINATION SQUARE MUST BE TRUE
Should not gap or overlap when square is flipped over (see dotted figure).
|
|
|
|
|
|
|
| Straight edge or | |
Draw light line on |
|
|
|
|
| a 3/4 in. board, | |||
board along this |
|
|
|
|
| this edge must be | |||
edge. |
|
|
|
|
| perfectly straight. | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gap from untrue square when flipped over.
8
