Craftsman 139.5391 owner manual Install the Header Bracket, Wall Header Bracket Installation

INSTALLATION STEP 2

Install the Header Bracket

You can attach the header bracket either to the wall above the garage door, or to the ceiling. Follow the instructions which will work best for your particular requirements. Do not install the header bracket over drywall. If installing into masonry, use concrete anchors (not provided).

WALL HEADER BRACKET INSTALLATION

•Center the bracket on the vertical centerline with the bottom edge of the bracket on the horizontal line as shown (with the arrow pointing toward the ceiling).

•Mark the vertical set of bracket holes (do not use the holes designated for ceiling mount). Drill 3/16" pilot holes and fasten the bracket securely to a structural support with the hardware provided.

HARDWARESHOWNACTUALSIZE

Lag Screw 5/16"-9xl-5/8"

Wall Mount

Optional
Mounting	Holes
	Ve_ical
	Centerline
Header	Door
Wall	Lag Screws
	5/16"x9x1-5/8"

2x4 Structural Support

DoorSp#ng

/ f

Horizontal

Line		/ /
	/	Garage
		Door

Highest Point of

Garage Door Travel

Centetline

of Garage Door

CEILING HEADER BRACKET INSTALLATION

•Extend the vertical centerline onto the ceiling as shown.

•Center the bracket on the vertical mark, no more than 6" (15 cm) from the walt. Make sure the arrow is pointing away from the wall. The bracket can be mounted flush against the ceiling when clearance is minimal.

•Mark the side holes. Drill 3/16" pilot holes and fasten bracket securely to a structural support with the hardware provided.

Header /

Bracket

6" (15 cm) Maximum

Ceiling Mounting	Holes	Door	_J
		Spring

Lag Screws 5/16"x9x1-5/8"

Header Wall

13