Craftsman 139.5391 Programming, To Add or Reprogram a Hand.held Remote Control, Function Remotes

PROGRAMMING

NOTICE: If this Security,l_ garage door opener is operated with a non-rolling code transmitter, the technical measure in the receiver of the garage door opene_ which provides security against code-theft devices, will be circumvented. The owner of the copyright in the garage door opener does not authorize the purchaser or supplier of the non-rolling code transmitter to circumvent that technical measure.

Your garage door opener has already been programmed at the factory to operate with your hand-held remote control. The door will open and close when you press the large push button.

Below are instructions for programming your opener to operate with additional Security÷ _ remote controls.

To Add or Reprogram a Hand.held Remote Control

USING THE "LEARN" BUTTON USING THE PREMIUM CONTROL CONSOLE

1.Press and release the "learn" button on the motor unit. The learn indicator light will glow steadily for 30 seconds.

2.Within 30 seconds press and hold the button on the hand-held remote* that you wish to operate your garage door.

3.Release the button when the

motor unit lights blink. It has learned the code. If light bulbs are not installed. [wo clicks will be heard

To Erase All Codes From Motor

Unit Memory

To deactivate any unwanted remote, first erase all codes:

Press and hold the "learn" button on motor unit until the learn indicator

light goes out (approximately 6 seconds). All previous

codes are now erased. Reprogram each remote or keyless entry you wish to use.

1.Press and hold the button on the

hand-held remote* that you wish to operate your garage door.

2.While holding [he ENTER 3utton. press and hold the LIGHT button on the Premium Control Console.

3, Continue holding [he ENTER and LIGHT buttons while you press the push bar on the Premium Control Console (all three buttons are heldL

4, Release buttons when the motor

unit lights blink. It has learned the code. If light bulbs are not installed, two clicks will be heard.

*3.Function Remotes

If provided with your garage door opener, the large button is factory programmed to operate it. Additional

buttons on any
Security÷ _ 3-Function	_
remote or compact	_'_	_
remote Can be	_
programmed to operate	_	__
other Security.l._garage	___
door openers.

35