Craftsman 247.795950 manual Assembly Instructions, Tools Requiredfor Assembly

ASSEMBLY INSTRUCTIONS

Flat --_/1_
Washer ( (	'j
5/16" I.D.

'q" Hex Lock

Nut 5/16-18

Thread

iMPORTANT: This unit is shipped WITHOUT GASO- LINE or OIL in the engine. After assembly, see opera- tion section of this manual for proper fuel and engine oil recommendations.

NOTE: To determine right and left hand sides of your

chipper-shredder, stand behind the unit with the engine the farthest away from you. See figure 6.

Your chipper-shredder has been completely assem- bled at the factory, except for the hopper assembly (hopper hood and upper leaf ramp section have been sub-assembled), upper guide assembly, chute deflec- tor and the catcher bag, The hardware pack safety

glasses and bottle of oil are also included in the carton.

The hardware pack contains the parts shown in figure 1 (shown full size).

Hex Bolt

5/16-18 x 8-3/8" Long

TOREMOVECHIPPER-SHREDDERFROMCARTON

Cut the corners of the carton. Remove all packing inserts. Roll chipper-shredder out of the carton. Make

certain all parts and literature have been removed before the carton is discarded.

TOOLS REQUIREDFOR ASSEMBLY

(1)Phillips Screwdriver

(2)1/2" or Adjustable Wrenches

12/ 7116" or Adjustable WrenchesFunnel

Machine Screws

1/4-20 x 1/2" Long

Hex Lock Nuts

1/4-20 Thread

FIGURE 1.